AI Agents for
Epicor Accounts Payable
Reading the supplier invoice is mostly solved. Linking it to the right receipt lines, and deciding what to do when it does not match, is where Epicor AP still takes the time.
- Capture is the commodity layer on Epicor: AP invoice recognition, ECM with Intelligent Data Capture, the Prism Smart Data Capture Agent and outside tools all read invoices.
- The time goes on linking receipt lines in AP Entry and on the invoices AutoMatch leaves unmatched. Users describe both on EpiUsers.
- Kinetic 2026.100 raised AP invoice linking from roughly 100 to 1,000, so check your release before buying a fix for an old complaint.
- In an illustrative month, 300 unmatched invoices grouped into six patterns. The largest needs only a rule for when to chase; the smallest, possible duplicates, is the costliest to miss.
- ChatFin prepares each AP invoice with its receipt links and evidence. A named person approves before it goes into Kinetic or Prophet 21.
AI agents for Epicor accounts payable match supplier invoices to purchase order and receipt lines, group the ones that do not match by pattern, and prepare each AP invoice for a person to approve. ChatFin does this on Kinetic through BAQs and the REST API v2, and on Prophet 21 through the OData data services and the transaction API.
This page covers where Kinetic AP slows down according to the people who run it, the capture options Epicor and others sell, six exception patterns with an illustrative month, and the different routes on Prophet 21 and Eclipse.
What an agent does in Epicor AP
Reading the invoice is mostly a solved problem on Epicor. Epicor sells capture, Prism now has a document agent, and several outside vendors read supplier invoices. The slow part sits after capture: linking each invoice to the right receipt lines, deciding what to do with the ones that do not match, and closing the purchase order. That is the work an agent should take on.
ChatFin works after capture, on matching and exceptions. It reads purchase orders and receipts through BAQs on Kinetic and the OData data services on Prophet 21, and prepares each AP invoice with its receipt links attached.
Where Kinetic AP slows down
Kinetic AP users are specific about where the time goes, and Epicor's own release notes agree with them.
| What users report | Where | What it means for an agent |
|---|---|---|
| Adding receipt lines in AP Entry takes several clicks per invoice; one user called it very time consuming and the screens slow | EpiUsers, Nov 2025 | Line linking is the work worth taking off people |
| AP workflow v2 has an AutoMatch task that most users are still testing; a finance manager called it very complicated on the back end | EpiUsers, Sep 2023 | Native matching exists, so an agent should handle what it leaves |
| A capture product tried for AP was described as quite finicky; the poster wanted received lines matched to invoices so the PO could close | Same thread | The outcome they wanted was a closed PO |
| Kinetic 2026.100 raised AP invoice linking from roughly 100 to 1,000 and added copy invoice and multi select delete | Epicor blog, May 2026 | Epicor is fixing high volume AP in the product, so check your release first |
Check your Kinetic release before buying anything. Since May 2026 Kinetic ships monthly, and some of the friction in older threads may already be gone on your tenant.
ChatFin does not replace AP workflow v2 or AutoMatch. It takes the invoices that AutoMatch leaves unmatched, which is where the clicks and the waiting are.
Capture options, and where each one stops
Epicor now offers three ways to turn a supplier document into data, and outside vendors offer more. They differ in where they stop.
| Option | What it does | Where it stops |
|---|---|---|
| AP invoice recognition | Listed by Epicor among the Kinetic finance automations | Recognition, not exception handling |
| ECM with Intelligent Data Capture | Epicor's document capture, named on the Prophet 21 finance page and the integration page | Capture into the ERP's document flow |
| Prism Smart Data Capture Agent | In Epicor's words, extracts and validates complex documents across AP and compliance workflows; named 19 May 2026 | No release says it posts the AP invoice; actions need human approval |
| Outside AP platforms | Capture, coding, approval routing and posting through an API or file integration, depending on vendor and product | Varies; compared on the alternatives page |
ChatFin can read documents too, but on Epicor it is most useful after whichever capture tool you already run, working the matching and exceptions.
Six exception patterns, 300 invoices
Take an illustrative Kinetic plant where 300 supplier invoices failed automatic matching in a month. Sorted by amount, that is 300 separate decisions. Grouped by pattern, it is six.
| Pattern | Invoices | What it looks like | Where it goes |
|---|---|---|---|
| Invoice before receipt | 90 | No receipt line yet for the PO line | Hold and recheck daily; chase receiving after a set number of days |
| Short receipt, full invoice | 60 | Received quantity below invoiced quantity | Supplier, with the receipt attached |
| Price above PO | 55 | Unit price higher than the PO line | Clear within tolerance; above it, purchasing |
| Freight or charges with no PO line | 45 | A charge the PO never carried | Coding proposal tied back to the receipt it belongs to |
| Invoice against a closed PO | 30 | No open line to match | Requisitioner, to confirm the goods arrived |
| Possible duplicate | 20 | Same supplier and amount, different invoice number | Hold; the receipt supports only one |
| Total | 300 |
In this example the first group is the largest and needs no human decision at all, only patience and a rule for when to chase. The duplicate group is the smallest and the most expensive to miss, because the usual duplicate check compares supplier, amount and invoice number, and the number is what changed.
ChatFin sorts unmatched Epicor invoices into patterns like these and routes each group to its owner. Where a tolerance rule covers a group, ChatFin proposes the clearing and names the rule it applied.
Prophet 21 and Eclipse take different routes
On Prophet 21, Epicor describes AP integrated with inventory receipts and purchase orders, with ECM and Intelligent Data Capture for invoice capture and vendor rebates posted to the GL. Distributors buy high volumes of stock lines from a smaller set of suppliers, so the match is usually line heavy and the exceptions cluster on price and freight.
Read through OData
Purchase orders, receipts and open AP from the OData data services on the customer hosted middleware.
Match and group
Lines linked where they agree; the rest grouped by pattern as above, with freight kept apart from stock lines.
Prepare for the transaction API
The approved invoice is prepared for the Prophet 21 transaction API, which integrators document as the write path.
Expect retries
The Supergood scorecard reports dropped sessions in production, so writes are small batches with a check after each.
Eclipse distributors have a different route. Epicor sells an Accounts Payable API for Eclipse inside paid Premium API Bundles, aimed at invoice automation and outside AP platforms. Several AP vendors already use it, and the alternatives page lists them.
ChatFin reads Prophet 21 AP through the OData data services and prepares approved invoices for the transaction API. For Eclipse, confirm scope with ChatFin on a call before planning around it.
Designing the write back on Kinetic
The write back is where AP governance is decided, and Kinetic gives you the parts to build it properly. The Open REST API page says security aligns with existing ERP user and data permissions, and that Epicor Functions are exposed through REST as reusable services. Put together, that suggests a design with three pieces.
A read only integration user
It can query purchase orders, receipts, suppliers and open AP through BAQs, and it cannot create or change anything.
One Epicor Function for the write
The function takes an approved invoice, checks that the lines still match open receipt lines and that no invoice with the same supplier and amount arrived since, and only then creates the AP invoice. Your team owns the checks.
A record of who approved
The approver's name and the evidence go with the invoice, so an auditor can trace any AP invoice back to a person and a document.
This keeps the agent's permissions narrow and puts the final checks inside Epicor, where your administrator can read them. If you already route invoices through AP workflow v2, the agent's draft can enter that workflow instead, and approval stays in one place.
ChatFin prefers this pattern on Kinetic: reads under one user, writes through a function your team can inspect, and approval in one system rather than two.
Where this underperforms on Epicor
Three conditions where an agent will not fix Epicor AP.
ChatFin measures the receiving delay and counts duplicate suppliers early in a project, because those two numbers decide how much of the rest is worth automating.
Other Epicor pages
The rest of the Epicor set, each page taking one finance area on Kinetic and Prophet 21.
AI agents for Epicor
Kinetic and Prophet 21 routes, Prism today, the 2028 calendar
Epicor FP&A
BAQ and trial balance tie outs, WIP and variance commentary, Epicor FP&A
Epicor month end close
Capture COS/WIP, multi company consolidation, intercompany
Epicor accounts receivable
Cash Receipt, unapplied cash, Cash Collect, Prophet 21 statements
Epicor AI alternatives
Prism, outside AP vendors, connectors and ChatFin, layer by layer
Questions Epicor AP teams ask first
Does Epicor Prism automate accounts payable?
Partly. The Smart Data Capture Agent, named in Epicor's May 2026 release, extracts and validates documents across AP and compliance workflows, and actions through Prism need human approval. No Epicor release we read says a Prism agent posts AP invoices, and an invoicing agent is listed as in development with no date.
How does an AI agent create an AP invoice in Kinetic?
Through the REST API v2, using the business object behind AP Entry or an Epicor Function that wraps it with your checks, signed in as an integration user with an API key. ChatFin prepares the invoice and its receipt links, and a named person approves before the call is made.
Do we still need AP workflow v2 and AutoMatch?
Yes, if they work for you. They are in the product. ChatFin works on the invoices AutoMatch leaves unmatched rather than replacing it.
What about AP on Eclipse?
Eclipse has its own REST API, and Epicor sells an Accounts Payable API in paid Premium API Bundles for invoice automation. AP vendors such as Vergo and Enlighten work with Eclipse distributors. Confirm ChatFin's Eclipse scope on a call.
After capture: matched lines, grouped exceptions, approved invoices.
ChatFin reads purchase orders and receipts from Kinetic or Prophet 21, links invoice lines to receipt lines where they agree, and sorts the rest into patterns with an owner for each.
Each AP invoice is prepared with its source document and receipt links, and a named person approves it before it goes back through the documented API.
Book a demoAll images are served from the Pexels content network. No third party product screenshots, vendor logos or licensed media are used on this page.
Bring last month's unmatched invoices.
We will group them by pattern with ChatFin on a call and show which groups need a person and which need only a rule.